Honeywell’s microcontroller-based, ceiling mount DUAL TEC Motion
Sensor provides all of the advantages of DUAL TEC motion sensor accuracy and
reliability in a convenient ceiling mount design.
Features
Microwave Advanced Processing (MAP)
Incoming microwave
and PIR signals are constantly monitored and individually qualified for
intrusion characteristics. The timing and sequence of each of these signals must
be qualified by MAP settings to specific environments, allowing for optimum
catch performance and false alarm immunity.
Microwave/PIR Technology
The use of dual technology
provides the best detection available while virtually eliminating false alarms
and costly service calls.
Built-in Diagnostics and Supervision
Allows trouble
conditions to be quickly identified, diagnosed and corrected.
Ceiling Mount Design
360° field-of-view, mounting height
from 8' to 16' (2.4m to 4.9m), install as recessed or surface mount.
Microcontroller-initiated Self-tests
Microcontroller
automatically initiates self-tests at power-up, trouble conditions and
programmed intervals.
Trouble Output
After a trouble is confirmed with a
self-test, the trouble output can be used to annunciate the trouble condition.
Full Supervision Microwave/PIR
– Patented INFORMER®
circuit constantly monitors microwave and PIR against blockage and
misapplication.
– Independent circuit supervises both microwave and PIR
against failure; at a loss of signal, microcontroller initiates self-test and
unit switches automatically to single technology operation.
Mounting
Surface or flush mount on ceilings (flush mount
kit included); maximum standard range obtained at 11' (3.4m). PIR mirror
assembly included for installation on 12' to 16' (3.7m to 4.9m)
ceilings. | 
