|
|
FG-1625R / 1625RT |
|
|
|
|
|
|
|
The new FG-1625R Glassbreak Detector uses the latest
technology to provide faster response and increased false alarm
immunity. The FG-1625R is specifically designed to allow fast,
easy installation, while the adjustable sensitivity settings can
compensate for the acoustics of any room. Optimum operation
can be quickly verified using the FG-701 Glassbreak Simulator.
 Features
- FlexCore™ Signal Processor
The FlexCore Signal Processor is
an Application Specific Integrated
Circuit (ASIC), which processes
sound data in parallel rather than
sequentially for faster, more accurate
detection decisions.
The combination of proven
FlexGuard® performance with the
speed of FlexCore processing provides
unmatched false alarm immunity
without compromising detection.
- Easy Installation and Setup
Honeywell’s patented technology
allows remote activation of Test
Mode (with simulator). The FG-1625R
has a centered wire entry hole, 45º
terminal blocks and EOL terminals.
A hand-clap feature verifies the
detector is functioning.
- Selectable Sensitivity
Two dip switches on the FG-1625R
make it easy to set the sensitivity to
match the acoustics of room. Four
different sensitivity levels are available,
ranging from very low to high. The
range can then be verified remotely
with the FlexGuard FG-701
Glassbreak Simulator.
- Mount the Detector Anywhere
Mounts on any wall, in the window
frame, or on the ceiling, with no
minimum range and a maximum
range of 25’ (7.6m) to the glass.
- Covers All Glass Types
The FG-1625R works on all glass
types, including plate, tempered,
laminated, wired, film-coated,
sealed insulating glass.
- Multiple Domain Signal Analysis
The FG-1625R performs Multiple
Domain Signal Analysis in which time,
frequency and amplitude characteristics
are evaluated for signal qualification.
This enables the detector to accurately
discriminate false alarms from true
glassbreak events.
- Enclosed PC Board
The PCB is protected from potential
damage during installation.
- Patented Remote Test Mode
The Patented Remote Test Mode can
enable or disable the indicator LEDs
remotely using the FG-701 Glassbreak
Simulator. The detector automatically
resets from Test Mode in five minutes.
- Mounting Locations
The FG-1625R can be mounted on
the ceiling, opposite wall, adjoining
wall, or the same wall as the glass.
|
|
|
|
|
|
|
|
