 FG-1625 Glassbreak Detector
The FG-1625 Glassbreak Detector uses the latest technology to
provide faster response and increased false alarm immunity. The FG-1625 is
specifically designed to allow fast, easy installation, while the adjustable
sensitivity settings can compensate for the acoustics of any room. Optimum
operation can be quickly verified using the FG-701 Glassbreak Simulator.
 FlexCore™ Signal Processor
The FlexCore Signal
Processor is an Application-Specific Integrated Circuit (ASIC), which processes
sound data in parallel rather than sequentially for faster, more accurate
detection decisions. The combination of proven FlexGuard® performance with the
speed of FlexCore processing provides unmatched false alarm immunity without
compromising detection.
Easy Installation and Setup
Honeywell’s
patented technology allows remote activation of Test Mode (with simulator). The
FG-1625 has a centered wire entry hole, 45° terminal blocks and EOL
terminals. A hand-clap feature verifies that the detector is functioning.
Selectable Sensitivity
Two DIP switches on the
FG-1625 make it easy to set the sensitivity to match the acoustics of the room.
Four different sensitivity levels are available, ranging from very low
to high. The range can then be verified remotely with the FlexGuard FG-701
Glassbreak Simulator.
Mount the Detector Anywhere
Mounts on any
wall, in the window frame, or on the ceiling, with no minimum range and a
maximum range of 25' (7.6m) to the glass.
Covers All Glass Types
The FG-1625 works on
all glass types, including plate, tempered, laminated, wired, film-coated and
sealed insulating glass.
Multiple Domain Signal Analysis
The FG-1625
performs Multiple Domain Signal Analysis in which time, frequency and amplitude
characteristics are evaluated for signal qualification. This enables the
detector to accurately discriminate false alarms from true glassbreak
events.
Enclosed PC Board
The PCB is protected from
potential damage during installation.
Patented Remote Test Mode
The Patented Remote
Test Mode can enabled or disable the indicator LEDs using the FG-701 Glassbreak
Simulator. The unit automatically resets from Test Mode in five
minutes.
Mounting Locations
The FG-1625 can be mounted
on the ceiling, opposite wall, adjoining wall or the same wall as the
glass. | 
